Product Profile of Wire Crimping And Pressing Machine
Control Signals offers Wire Crimping and Pressing Machine. Control Signals supplies a wide range of production equipments for PCB assembly and wire-harness like wire sizing machine, Automatic Soldering Systems, Desoldering systems, Rework System, PCB Insertion and Assembly. The Wire Crimping and Pressing Machine of model number WCP-10 is a pneumatic wire-terminal crimping press that is suitable for a wide variety of wire-crimping operations required to produce a wire-harness for the electronic, electrical and automotive sectors.
Key Features of Wire Crimping And Pressing Machine
- Crimp-head made from special grade tool-steel
- Besides other crimping operations, the press processes crimp-terminals with double crimp.
- The tool- set is fabricated as per Core and Insulation diameter and their ratio, to impart consistent crimpped connections
- The press is actuated through a foot-pedal switch for producing a crimpped-connection.
- The terminal and wire is feed into the tool-set by hand prior to the tool-stroking.
- The terminals could be in singulated form or in chain/ tape form [Axial],
- The terminals are singulated during the crimping operation as they are hand-fed one by one.
- An Optional automatic chain feed system can be coupled with the machine for automatic operation
- Each terminal is singulated from the chain after crimping by the tool-set.
Product Specification of Wire Crimping And Pressing Machine
- Crimping Range:1.5 - 4.0 mm, 00 wires and suitable terminals
- Dimensions:500 x 200 x 650 (L x W x H)
- Models:WCP-10
- Power:50W, 220 VAC and compressed-Air
@ 0.5 cfm (At 60 Psi, filtered and lubricated Air)
- Production:600 - 1500 Crimps
- Weight:Approx 30
