Product Profile of Automatic Pneumatic Jumper-Wire Link Forming Machine
Control Signals supplies Automatic Pneumatic Jumper-wire Link Forming Machine. Control Signals offers a wide range of production equipments for PCB assembly and wire-harness like wire sizing machine, Automatic Soldering Systems, Desoldering systems, Rework System, PCB Insertion and Assembly. The Automatic Pneumatic Jumper-wire Link Forming Machine of model number WSC-50 is an automatic jumper/link forming machine capable of forming wires to different forms or cutting wire to equal size.
Key Features of Automatic Pneumatic Jumper-Wire Link Forming Machine
- The bare wire is dereeled from the spool using a special dereeling device and then fed to the wire straightener.
- The straightner could be a two plane straightner or a rotary straightner
- The wire is straightened and then passed through the feed unit.
- The feed unit meters the wire length as per the jumper-link size set on the feed unit.
- The wire is then conveyed to the cut & form die module, which operates as soon as the desired length of wire has been fed to it.
- Change-over from one size to the other takes just two minutes.
- Standard machine has one slide, multiple slide can be provided to obtain complex wire forms/geometry.
Product Specification of Automatic Pneumatic Jumper-Wire Link Forming Machine
- Dimensions:450 x 450 x 300 mm (L x W x H)
- Drive:Pneumatic (60 PSI, 3CFM)
- Length:2 - 70 mm
- Pitch:2 - 25 mm
- Power:100W, 220 AC
- Production:2500 - 5000 pcs/hr
- Tolerance:+ 0.2 mm
- Weight:35
- Wire Diameter:0.4 - 0.9 mm
- Models:WSC-50
