Vishal electromag industries suppliesoffers dc stepper motors. These are hybrid type two phase or four phase unipolar or bipolar motors. , this dc stepper motor which converts electronic signals into mechanical motion. Physical configurations of this dc stepper motor include;
Available in a nema frame sizes 2.3 [dia 58 mm], 3.4 [86 mm], and 4.2 [108 mm], with full step angle 1.8° and half step angle 0.9° and step accuracy of [5% non- cumulative. Voltages available are 5, 6, 12 or 24 v dc.Holding torque is available from 2 kg.Cm [in 12 different models.]imported stepper motor rewinding/repairing can also be done, or its equivalent motor can be offered.
Some of the technical features of this dc stepper motor include;
The motor shaft rotates at 200 steps/rev in full step mode or 400 steps/rev in half step mode and can be driven in either direction. It can be driven at high stepping rates with chopper current drive. Sthese stepping motors offer mmany advantages are provided by this stepping motors as an actuator in a digitally controlled positioning system, . They can be easily interfaced with a microcomputer or microprocessor to provide opening, closing, rotating, reversing, cycling and highly accurate positioning in a variety of applications. Mechanical components such as gears, clutches, brakes and belts are not needed since stepping is accomplished electrically.Due to detent torque, the motor applies holding torque at standstill to help prevent unwanted motion. The motors rugged construction results in long life and eliminates the need for regular maintenance. ; these stepper motors are available in a nema frame sizes 2.3 [dia 58 mm], 3.4 [86 mm], and 4.2 [108 mm], with full step angle 1.8° and half step angle 0.9° and step accuracy of [5% non- cumulative. Voltages available are 5, 6, 12 or 24 v dc.Holding torque is available from 2 kg.Cm [in 12 different models.]imported stepper motor rewinding/repairing can also be done, or its equivalent motor can be offered.
