Product Profile of Solar Power Controlling System
Solar Power Controlling System carries a voltage of 24V. The Controlling System has a 2 Pole DC MCCB in PV path, Battery path and Load output. The Controller is designed in a way that it prevents both overcharging and deep discharge by signaling over voltage cutoff or under voltage cutoff. The Controlling System has a Temperature compensated Battery under voltage and over voltage set point The Solar Power Controlling System has an individual analog meter to monitor PV current.
Technical Specification of Solar Power Controlling System
- 2 Pole DC MCCB in PV path, Battery path and Load output.
- Isolated 4-20 mA analog transducers suitable for driving upto 500 Ohm load, for PV current
- Provision to connect external battery charger of upto 300 A with 2 Pole DC MCCB.
- Cabinet confirms to IP55 degree of protection, type tested at recognized lab. And painted with epoxy paint for long life in corrosive environment.
Key Features of Solar Power Controlling System
- Battery over voltage cutoff to prevent overcharging and under voltage cutoff by disconnecting load, to prevent deep discharge
- Battery voltage and current and Load voltage and current
- High efficiency DC/DC converter providing 24 V output and protected against overload and short circuit to deliver precise voltage to load, irrespective of battery voltage and load current variation
- Alarms for Battery voltage high and low, Load voltage high and low, Load disconnected and PV failure
- Individual Analog meters to monitor PV current, Battery voltage and current and Load voltage and current
- Temperature compensated Battery under voltage and over voltage set point
- Potential/Volt free contact for various alarms
- Fuseless design since installation location is unmanned
