Product Profile of Double-Sided Printed Circuit Board

NSP Electronics Limited offers Double-Sided Printed Circuit Board. NSP Electronics Limited is an ISO - 9002 and ISO 14000:1996 accredited company. The Company also manufactures and exports Single Sided Printed Circuit Board. The Double Sided Printed Circuit Board has thickness of either 1.6 mm or 2.4mm or 3.2mm and Copper Thickness of either 17.5 Microns or 35 Microns or 70 microns. The Double Sided Printed Circuit Board has Minimum track width of 0.17 or 0.15mm and the Solder mask is of Green colour. The Double Sided Printed Circuit Board has either Lead Free HAL or Immersion Silver or Electroless Nickel Immersion Gold surface finish. The Double Sided Printed Circuit Board is provided with Slots, Cut outs, Carbon contacts and peel off. The Double Sided Printed Circuit Board has simple routing with 2.4 mm router.

The Specifications of Double-Sided Printed Circuit Board are as follows:

• Printed Circuit Board Thickness: 1.6mm/2.4mm/3.2mm

• Copper Thickness: 17.5 Microns/35 Microns/70 microns

• Min. Track Width/ Spacing: 0.17 / 0.15mm [7 Mils/ 6 Mils]

• Min. Hole: 0.30mmn [12 Mils] [FINISH]

• Solder mask: Green

• Surface Finish: Lead Free HAL / Immersion Silver/ Electroless Nickel Immersion Gold

• Legend: White

• Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request.

• Routing: Simple routing with 2.4 mm [0.094"] router