Product Profile of NTP Server in Case for Server Rack Mount
NTP Server in Case for Server Rack Mount provides accurate time to networks of any size. The NTP Server synchronizes all systems either NTP or SNTP compatible and itself is synchronized by any external radio clock. The NTP Server comes under the model name of LANTIME M300. The NTP Server in Case for Server Rack Mount has antenna connected with up to 300 m of standard coaxial cable RG 58.
Paryana Automation Pvt. Ltd supplies NTP Server in Case for Server Rack Mount, manufactured by Meinberg. Paryana Automation Pvt. Ltd is the supplier of analogue inputs, four analogue inputs, analogue outputs, analogue inputs with modbus, four analogue inputs with modbus, analogue outputs with modbus, digital i/o with modbus, serial converters and repeaters, power supplies, din-mounting kit, cables, backplanes, utility software etc.
Key Features of NTP Server in Case for Server Rack Mount
- Provides accurate time to networks of any size
- Synchronizes all systems either NTP or SNTP compatible and itself is synchronized by any external radio clock
- Comes with USB port for installing firmware updates, locking front panel menu access and backup/ restore of configuration and log files
- Antenna connected with up to 300 m of standard coaxial cable RG 58
- Model name of LANTIME M300
Product Specification of NTP Server in Case for Server Rack Mount
- Accuracy:Accuracy of pulse outputs : Depends on oscillator option: < ±100ns (OCXO MQ, OCXO HQ, OCXO DHQ).
- Available Option:2 or 4 x additional 10/100 MBit with RJ45, 1 x 10/100 MBit and 1 x 10/100/1000 MBit (1GE) with RJ45 or 1 x 10/100 MBit and 3 x 10/100/1000 MBit (3GE) with RJ45 jack.
- Control:Control elements : Eight push buttons to set up basic network parameters and to change receiver settings.
- Display:LC-display, 2 x 40 characters, with backlight.
- Interface:Two independent serial RS232-interfaces, menu configurable (in case of RDT models without internal receiver - the serial interfaces will be used as reference input) ; Network Interface : Standard: 2 x 10/100 MBit with RJ45 connector.
- Network protocol:Network protocols OSI Layer 4 (transport layer) : TCP, UDP ; Network protocols OSI Layer 7 (application layer) : TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP.
- Operating System:Operating System of the SBC : Linux with nano kernel (incl. PPSkit).
- Output Signals:Optional Output Signals : Additional Output Options - This LANTIME NTP server comes with many additional outputs options: PPS, 10MHz, programmable pulse outputs (PPS, PPM, PPH, DCF_MARK ...), IRIG modulated and unmodulated time code, T1 / E1 telecom signals, Frequency Synthesizer - to name just a few. Contact us for your specific device configuration.
- Outputs:Frequency outputs : 10 MHz via female BNC connector, TTL into 50 Ohm, Accuracy depends on oscillator (standard: TCXO), look at oscillator options.
- Ports:Universal Serial Bus (USB) Ports : 1x USB Port in front panel: - install firmware upgrades, backup and restore configuration files, copy security keys, lock/unlock front keys.
- Power Supply:Standard: 100-240 VAC, available DC variants: 100-240 VDC, 12VDC, 24VDC and 48VDC.
- Pulse Output:Pulse Per Second (PPS), TTL level, pulse width: 200ms.
