Product Profile of High End NTP Time Server
High End NTP Time Server is used to provide accurate time to networks of any size. The Server has a front panel that includes a VF display and keypad for easy configuration, and indication of the receiver and NTP subsystem status. The Server comes under the model name of LANTIME M600. The High End NTP Time Server comes with USB port for installing firmware updates, locking front panel menu access and backup/ restore of configuration and log files.
Paryana Automation Pvt. Ltd is the supplier of High End NTP Time Server, manufactured by Meinberg. Paryana Automation Pvt. Ltd offers analogue inputs, four analogue inputs, analogue outputs, analogue inputs with modbus, four analogue inputs with modbus, analogue outputs with modbus, digital i/o with modbus, serial converters and repeaters, power supplies, din-mounting kit, cables, backplanes, utility software etc.
Key Features of High End NTP Time Server
- Used to provide accurate time to networks of any size
- Front panel that includes a VF display and keypad for easy configuration, and indication of the receiver and NTP subsystem status
- Comes under the model name of LANTIME M600
- Comes with USB port for installing firmware updates, locking front panel menu access and backup/ restore of configuration and log files
- Antenna connected with up to 300 m of standard coaxial cable rg 58
- Can be provided with a large number of additional output options
- Two independent serial rs232 interfaces, menu configurable
- Four bi colour LED showing status of: reference time, time service, network and alarm
- Eight push buttons to set up basic network parameters and to change receiver settings
- Vacuum fluorescent graphic display
Product Specification of High End NTP Time Server
- Accuracy:Accuracy of pulse outputs : Depends on oscillator option. Note: TCXO IS NOT available with M600
- Alarm Output:Synchronous state of the module, relay output (changeover contact).
- Ambient Temperature:0 ... 50°C / 32 ... 122°F.
- Available Option:/TGP: 19" desktop case, height: 157mm (3U), width: 257mm (42HP), depth: 316mm ; /BGT: 19" module case, height: 132mm (3U), width: 483mm (84HP), depth: 260mm
- Baud rate:300, 600, 1200, 2400, 4800, 9600, 19200 Baud.
- Code:Generated time codes : IRIG B002: 100pps, DCLS signal, no carrier, BCD time of year ; IRIG B122: 100pps, AM sine wave signal, 1 kHz carrier, BCD time of year ; IRIG B003: 100pps, DCLS signal, no carrier, BCD time of year, SBS time of day ; IRIG B123: 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day ; IEEE1344: Code according to IEEE1344-1995, 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of day.
- Control:Control elements : Eight push buttons to set up basic network parameters and to change receiver settings.
- Data format:Data format of interfaces : 7N2, 7E1, 7E2, 7O1, 8E1, 8N1, 8O1; Time strings : Meinberg Standard-Telegram , SAT, Uni Erlangen (NTP), SPA, RACAL, Sysplex, NMEA0183 (RMC, GGA, ZDA), Meinberg GPS, COMPUTIME, ION oder Capture-Telegramm.
- Display:Vacuum fluorescent graphic display (VFD), 256 x 64 dots.
- Firmware:Firmware Updates : Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product.
- Form Factor:Three different variants are available, standard version is: 19" module case, height: 44.5mm (1U), width: 483mm (84HP), depth: 350mm (Pic. middle).
- Formate:Supported Time String Formats : Meinberg Standard Timestring, Uni Erlangen Timestring, SYSPLEX Timer, NMEA, Computime, ABB-SPA, SAT, Arbiter.
- Humidity:Max. 85%.
- Interface:Two independent serial RS232-interfaces, menu configurable.
- Network protocol:Network protocols OSI Layer 4 (transport layer) : TCP, UDP ; Network protocols OSI Layer 7 (application layer) : TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP.
- Operating System:Operating System of the SBC : Linux with nano kernel (incl. PPSkit).
- Output:Unmodulated time code output : DCLS, TTL into 50 Ohm via female BNC connector, active high ; Modulated time code output : IRIG AM sine wave signal via female BNC connector: 3Vpp (MARK), 1Vpp (SPACE) into 50 Ohm.
- Output Signals:Optional Output Signals : Additional Output Options - This LANTIME comes with many additional outputs options: PPS, 10MHz, programmable pulse outputs (PPS, PPM, PPH, DCF_MARK ...), IRIG modulated and unmodulated time code, T1 / E1 telecom signals, Frequency Synthesizer - to name just a few. Contact us for your specific device configuration.
- Outputs:Frequency outputs : 10 MHz via female BNC connector, TTL into 50 Ohm, Synthesizer 1/8 Hz up to 10 MHz via female BNC connector, TTL into 50 Ohm, Accuracy depends on oscillator (standard: OCXO LQ), look at oscillator options.
- Ports:Universal Serial Bus (USB) Ports : 1x USB Port in front panel: - install firmware upgrades, backup and restore configuration files, copy security keys, lock/unlock front keys.
- Power Consumption:30W
- Power Supply:Standard: 100-240 VAC, available DC variants: 100-240 VDC, 12VDC, 24VDC and 48VDC.
- Protocol:Internet Protocol (IP) : IP v4, IP v6 ; Network Time Protocol (NTP) : NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905), SNTP v3 (RFC 1769), SNTP v4 (RFC 2030), MD5 Authentication and Autokey Key Management ; Time Protocol (TIME) : Time Protocol (RFC 868) ; Daytime Protocol (DAYTIME) : Daytime Protocol (RFC 867) ; Hypertext Transfer Protocol (HTTP) : HTTP/HTTPS (RC 2616) ; Simple Network Management Protocol (SNMP) : SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418).
- Pulse Output:Pulse per second (PPS) and pulse per minute (PPM) via female BNC connectors, TTL into 50 Ohm, pulse width: 200msec, active high.
- Supply:Scope of supply : Included in delivery is a MEINBERG outdoor antenna incl. mounting kit, pre-assembled antenna cable (except MRS, TCR and RDT models) and product documentation on USB storage.
- Support:Network Autoconfiguration Support : IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131), IPv6: Autoconfiguration Networking - AUTOCONF ; Technical Support : Meinberg offers free lifetime technical support via telephone or e-mail.
- Warranty/Guarantee:Three-Year Warranty.
