Product Profile of Top Mounted Reed Type Level Switch
Top Mounted Reed type Level Switch facilitates any number of pre-determined level controls initiating audio-visual signals with a single unit. The Level Switch consists of a vertical guide pipe [stem] containing sensor switches, magnetic float sliding over the stem according to the level in the tank, switch terminal head etc. Top Mounted Reed type Level Switch is manufactured by Dag Process Instruments Pvt. Ltd.
Dag Process Instruments Pvt. Ltd. Also manufactures a wide range of Process Control Switches like pressure switches, level switches, flow control switches and transmitters. The Top Mounted Reed type Level Switch is designed for operating under maximum pressure of 5 kg/cm² and temperature of 150° C.
Key Features of Top Mounted Reed Type Level Switch
- Since the switches operate on the principle of magnetic flux coupling with no mechanical connection, fluid contamination of switch components cannot occur.
- Only one moving component exists, that is, the no-wear float.
- Reliable in operation due to the large gap between the slide tube of the float and the fixed guide tube.
- Insensitive to dirt particles in the liquid.
- Several levels can be monitored by several reed contacts in the guide tube even with one float.
- Suitable for any fluid compatible with material of construction and specific gravity above 0.7.
- Operates in any position from vertical to an inclined angle of 30°, head assembly upward or downwards.
- Closing, opening or change over contacts can be selected.
Factory set level actuation points can be easily adjusted at site.
- Minimum possible distance between 2 level set points is 75 mm.
- All the floats and stoppers can be removed through bottom side of the stem, if necessary, for easy installation in vessel and retain them to their original position.
