Product Profile of Reed Type Level Switch Cum Indicator
Reed type Level Switch cum Indicator facilitates any number of pre-determined level controls and local visual indication. The Level Switch cum Indicator operates on the basis of float principle with magnetic transmission to reed switch. Dag Process Instruments Pvt. Ltd. Manufactures Reed type Level Switch cum Indicator.
Dag Process Instruments Pvt. Ltd. Offers a wide range of Process Control Switches like pressure switches, level switches, flow control switches and transmitters. The Reed type Level Switch cum Indicator is encapsulated in the stem that is actuated by a permanent magnet within the float and is provided with screwed or flanged type process connections.
Key Features of Reed Type Level Switch Cum Indicator
- Suitable for small atmospheric tanks as a local visual indicator plus remote level indication.
- Since the switches operate on the principle of magnetic flux coupling with no mechanical connection, fluid contamination of switch components cannot occur.
- Only one moving component exists, that is, the no-wear float.
- Reliable in operation due to the large gap between the slide tube of the float and the fixed guide tube.
- Insensitive to dirt particles in the liquid.
- Several levels can be monitored by several reed contacts in the guide tube even with one float.
- Suitable for any fluid compatible with material of construction and specific gravity above 0.7.
- Closing, opening or change over contacts can be selected.
- Factory set level actuation points can be easily adjusted at site.
- Minimum possible distance between 2 level set points is 65 mm.
- All the floats and stoppers can be removed through bottom side of the stem, if necessary, for easy installation in vessel and retain them to their original position.
