Dynemech offers a variety of screw support mounts to improve the design and performace of the machine tools to meet customer demand. Avilable in series dl/dlc/dlm/dlms/dml, these insulation plates having different load carrying capacities and different natural frequencies are assembled with screw support mounts to suit almost eveny industrial application. Series dl is for machines having tapped holes in the base. These mounts have a dimple on the top and the bolt from the machine foot rests over this dimple. Levelling of the machine can be done by turning the bolt. Dlm/dlms series mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. The flexible levelling screw accommodates uneven/sloped surfaces up to 5ยบ. Dlms series finds application where corrosion resistant materials for hygienic, climatic and environmental reasons are reqired. Mac level, series dml is suitable for high speed rotating machines having small or no axial forces. Dlt series mounts are used in the machines, which must be anchored to the floor along with levelling and vibration reduction. Bolts with through holes are provided in the machine foot and anchor bolt passes from the machine foot, mount and anchored in the floor nut. An insulating disc is provided between the nut and the machine foot to prevent vibration from transmitting in the floor via the bolt. The dimple and the thru hole in the mount are provided as per the bolt specifications of the machine.
