Product Profile of Microcontroller Based Soft Start Sine Wave Inverter
S.S Enterprises supplies Microcontroller based Soft Start Sine Wave Inverter. S.S Enterprises is an ISO 9001: 2000 certified company. The Microcontroller based Soft Start Sine Wave Inverter is available with multistage intelligent charging and protection of Short circuit and Low and high voltage cut off. The Sine Wave Inverter finds application in electrical and electronic appliances which are operating on electricity board supply.
Key Features of Microcontroller Based Soft Start Sine Wave Inverter
- Micro controller based design with dsp technology
- Pure sine wave output
- SMPS based battery charger charges battery from 110V onwards
- Charger based on three stage algorithm [boost, absorption and float]
- Selectable charging current can be varied from 5 amps to 11 amps.
- Complete overload and short circuit protection with facility to run highly inductive loads.
- Automatic overload reset for mild overload conditions
- Closed loop regulated sine wave output from no load to full load
- Soft start inverter mode for cold starting inductive loads.
- Compact double sided path design.
- Fan provided for cooling.[ heat sink temperature dependant]
- Input/AC range: 110V-280V
- Input DC Range of Single battery: 10V-14V
- Input DC Range of Double battery: 20V-28V
- Transfer time: < 70 ms
- Wave form: Sine wave
- Frequency: 50 Hz +/- 0.5
- Efficiency: > 90%
- Power Factor: 0.8
Product Specification of Microcontroller Based Soft Start Sine Wave Inverter
- Charger:Multistage intelligent charging, bulk mode,absorption, pulse and time based pulse.
- Efficiency:≥90%
- Frequency:50 Hz +/- 0.5
- Input AC Range:110V-280V
- Input DC Range:Single battery: 10V-14V
Double battery: 20V-28V
- Power Factor:0.8
- Protection:Short circuit, Low and high voltage cut off.
- Transfer Time:≤70ms
- Waveform:Sine wave
