Product Profile of Dual Channel Oscilloscope With Frequency Counter
Dual Channel Oscilloscope with Frequency Counter is available with maximum sensitivity of 1 mV/ DIV and the time base provides a maximum sweep time of 0.2 mS/ DIV. The Dual Channel Oscilloscope of model number KM-20-10 and KM-20-20, is sturdy, easy to operate and exhibit high operational reliability. The Dual Channel Oscilloscope is available with triggering level lock function and automatic synchronize function. Dual Channel Oscilloscope with Frequency Counter has a trigger level lock function which makes the triggering adjustment unnecessary.
Kusam-Meco is engaged in manufacturing Dual Channel Oscilloscope with Frequency Counter. Kusam-Meco also supplies wide ranges of digital test and measuring instruments that include multimeters and clamp meters to cater to varied range of requirements of government laboratories, research laboratories, engineering colleges and different segments of the industry. Kusam-Meco is an ISO 9001:2008 awarded company.
Dual Channel Oscilloscope with Frequency Counter has the following features:
- High luminance, internal graticule Toshiba CRT
- Japanese electronic encoder, light handy and reliable
- Fully sealed long live vertical mode switch
- ALT Triggering function and two independent signals simultaneous observation
- Triggering level lock function, automatic synchronizes function
- Built - in 6 digits frequency counter
- High intensity CRT with high acceleration voltage: The CRT is a high beam transmission, high intensity type with a high acceleration voltage of 2KV. It displays clear readable traces even at high sweep speeds
- Has a trigger level lock function which makes the triggering adjustment unnecessary
- Alternate triggering: Even an observation of two waveforms of different frequencies, the waveform of the each channel is stably triggered
- TV sync triggering: The oscilloscope has a sync separator circuit for triggering of TV-V and TV-H signals
- CHI Output: Terminated 50 W output of channel 1 signal available on rear panel for driving frequency counter or other instruments
- Z-Axis Input: Intensity modulation capability permits time or frequency markers to be added. Trace blank with positive signal, TTL compatible
- X-Y operation: Set the switch to X-Y. Then the instrument works as an X-Y oscilloscope. CH1 can be applied as horizontal deflection [X-axis] while CH2 provide vertical deflection [Y-axis]
Product Specification of Dual Channel Oscilloscope With Frequency Counter
- Accuracy:0.2%RO at 23 ± 5 (Self-Power Mode 0.25%RO at 23 ± 5).
- Calibration:SPAN and ZERO ± 10%.
- Common Mode Rejection:> 120db, 50 / 60Hz.
- Dielectric Strength:2.6KV AC / 1 Min, between Input / Power / Case.
- Frequency:45 ~ 70Hz
- Input Burden:0.1VA / 60Hz at 150V AC ; Self-Power Mode 2VA at 150V AC.
- Input Overload:Normal AC 110V, Voltage Over 500V Continuous. Self-Power Mode 150V AC Maximum.
Normal AC 5A, Current Over 15A Continuous; 50A 10 Sec / Hour ; 400A 0.5 Sec / Hour.
- Operating Condition:-10 ~ + 65, 20 ~ 95% RH Non - Condensed.
- Output Load:DC Current Mode : 10V DC Maximum, DC Voltage Mode : 10mA Maximum.
- Output Protection:Without Damage for Output Open or Short Circuit.
- Power Supply:AC or DC ± 20%, 50 / 60Hz £ ≤3VA / AC.
- Response Time:≤ 400mS. 0 ~ 99%; 0.5% P-P(STD) or Option.
- Size:120W x 115H x 73.4L
- Stability:< 0.2% / Year.
- Temperature Coefficient:≤100ppm / from 0 ~ 60; ≤ 50ppm / 23 ± 3
- Input Range:Normal Voltage 110V, Effective 85 ~ 150V
Normal Voltage 220V, Effective Range 160~300V.
Normal Current 5A, Effective Range 0~7.5A.
Normal Current 1A, Effective Range 0~1.5A.
