Product Profile of Clamp-On Digital Multi Meter
Clamp-On Digital Multi Meter is designed as DC 1000A / AC 800A Clamp-on and also in Full Multi meter range. The Clamp-On Digital Multi Meter of model 2754 A is an average sensing 16 functions analyzer and model 2754 A-T is a true RMS sensing 17 functions analyser. The Clamp-On Digital Multi Meter enables full auto ranging on all functions and enables backlight display. The Clamp-On Digital Multi Meter also has the facility of fast audible continuity test and diode test.
Kusam-Meco manufactures Clamp-On Digital Multi Meter. Kusam-Meco offers a wide range of advanced control & instrumentation products that include Digital Multimeter, Digital Clamp Meter, Data Logger, Resistivity Tester, Digital Elcb Tester, Analog Insulation Resistance Tester, Earth Resistance Tester, Insulation Tester, High Voltage Detector, Stroboscope etc. Kusam-Meco is an ISO 9001:2008 certified company. The range of products finds application in government laboratories, different segments of the industry, engineering colleges and research laboratories.
Key Features of Clamp-On Digital Multi Meter
- DC 1000A / AC 800A Clamp-on + Full Multi meter ranges
- Versatile & Handy
- Fully Auto-ranging on all functions
- Backlight Display [Model 2754A-T]
- 30ms Max HOLD to capture in-rush currents
- Data Hold, Max Hold & Relative Zero Mode
- Fast Audible continuity Test & Diode Test
- Auto power off
- Jaws Opening size: 50mm Max.
- Display: 3 ¾ digits 4000 counts
- Update Rate: 3 per second nominal
- Polarity: Automatic
- Operating Temperature: 0degree C - 40degree C
- Relative Humidity: Maximum 80%R.H. for Temperature upto 31degree C decreasing linearly to 50% R.H. at 40degree C
- Altitude: Operating below 2000m
- Storage Temperature: -20degree C - 60degree C, < 80% R.H. [with battery removed]
- Temperature Coefficient: Nominal 0.15 X [specified accuracy] / degree C at [0degree C ~ 18degree C or 28 degree C ~ 40 degree C], or otherwise Specified
- Power Supply: Standard 1.5V AAA Battery X 2
- Power Consumption: typical 11mA for DCA / ACA & 2.9mA for other Functions
- Low Battery: Below approx. 2.5V
- APO timing: Idle for 30 minutes
- APO Consumption: typical 10mA [Model 2754A]; typical 190mA [Model 2754A-T]
- Dimension: 227[L] X 78[W] X 40[H]mm
- Weight: approx 290 gm
