Product Profile of Panel Mounted Oxygen Monitors
Panel Mounted Oxygen Monitors are specifically designed for use in
Oxygen plants where the vented gases are mainly nitrogen and some wasted oxygen.
These Oxygen Monitors are µn;P based unit with a specially designed sampling configuration with an oxygen sensor at the end of a cable that makes it feasible to accurately measure Oxygen at a gas manifold. These Oxygen Monitors are panel mounted up to a distance of 10 meters away from the sensor. Panel Mounted Oxygen Monitors that comes under SP-1 CZ model can work in a temperature range varying from 0°C to 45°C.
Technovation Analytical Instruments Pvt Ltd manufactures Panel Mounted Oxygen Monitors. Technovation Analytical Instruments Pvt Ltd supplies energy-saving analysers and flue gas monitors, personal safety monitors, oxygen monitors, toxic gas monitors, air quality monitors and environmental monitors, combustible gas detectors, dew point and moisture meters, biogas and biomass Gasifier analyser etc. Technovation Analytical Instruments Pvt Ltd is an ISO 9001:2000 accredited company.
Key Features of Panel Mounted Oxygen Monitors
- µP based , just three key operation.
- ZERO and CAL potentiometers provided.
- 2 Alarm LED.
- Confidence flash provided.
- Low sample volume required.
- Quick and accurate response to oxygen.
- Easy to operate by any person.
- Programmable Alarms configuration, both alarms high or one high and one low. Settable throughout the range.
- Recorder output 0 - 1 V and 4 - 20 mA.
- µP based unit with a specially designed sampling configuration with an oxygen sensor at the end of a cable.
- Panel mounted up to a distance of 10 meters away from the sensor.
- Display: LED 12 mm high, with 3 digit.
- Range: 0 to 25% oxygen.
- Resolution: 0.1 % steps.
- Accuracy: ±2 % FSD at constant temperature.
- Power Supply: 220 VAC 50 Hz 1 Phase.
- Sensor type: Electrochemical.
- Sensor mounting: At end of cable of 1.5 meters.
- Calibration by ambient air or calibration gas.
- Size: 98 X 98 X 100 mm depth.
- Weigh: 1 kg. Approximately.
- Working temperature: 0°C to 45°C.
- Alarms: Two audible and visible.
- Alarm relay: One set NO, C, NC contact of 50 VA rating provided per alarm.
- Panel cut out size: 90 X 90 mm.
- Recorder Output: 0-1 V and 4- 20 mA.
