Product Profile of Microprocessor Controlled Multigas Personal Safety Monitor
Microprocessor Controlled Multigas Personal Safety Monitor is designed for the monitoring of four gases that include % oxygen, PPM carbon monoxide, PPM hydrogen sulphide and % LEL of a combustible gas. The Multigas Personal Safety Monitor is fitted with electrochemical sensors, which are mounted in diffusion mode. The Multigas Personal Safety Monitor works on disposable dry batteries and is capable of sampling, viewing and data logging of instantaneous value, STEL and TWA readings. Microprocessor Controlled Multigas Personal Safety Monitor that comes under Series 2005 is provided with two audible and visual alarms to facilitate ease of operation.
Technovation Analytical Instruments Pvt Ltd is the manufacturer of Microprocessor Controlled Multigas Personal Safety Monitor. Technovation Analytical Instruments Pvt Ltd offers wide range of energy-saving analysers and flue gas monitors, personal safety monitors, oxygen monitors, toxic gas monitors, air quality monitors and environmental monitors, combustible gas detectors, dew point and moisture meters, biogas and biomass Gasifier analyser etc. Technovation Analytical Instruments Pvt Ltd is an ISO 9001:2000 awarded company.
Key Features of Microprocessor Controlled Multigas Personal Safety Monitor
- Real time data logging.
- Viewing of Peak and Excursion values.
- 16 X 2 alphanumeric display with backlight.
- Two alarms both audio and visual.
- Combustible gas selection is programmable.
- Combustible gas displayed as % LEL or % V/V.
- Fitted with electrochemical sensors, which are mounted in diffusion mode.
- Works on disposable dry batteries.
- Microprocessor based and hand held unit.
- Portable.
- Display: 16 X 2 Alphanumeric backlit wide-angle viewing. Contrast programmable.
- Alarms: Two Alarms per gas, both audible and visual, user settable through the range. Low-Battery Alarm.
- Power: 6 Nos 1.5 V AA cells.
- Data logger: Instantaneous, STEL, TWA readings stored. Excursion and peak readings also.
- Relative Humidity: 5 - 95 % RH non-Condensing.
- Accuracy: 5 %.
- Weight: 400gms approximately.
- Size: 150 X 100 X 50 mm.
- Case: Robust ABS with belt clip.
- Calibration by: Gas or sensor O/P.
- Sampling: Diffusion mode.
- Low Battery: Indication provided.
- Gas Measuring ranges: Oxygen [0-25% with 0.1% steps], Carbon-monoxide [0-1000 PPM with 1 PPM steps], Hydrogen Sulphide [0-100 PPM with 0.1 PPM steps] and Combustible Gas [0-100 % LEL with 1 % LEL steps].
- For the monitoring of four gases % oxygen, PPM carbon monoxide, PPM hydrogen sulphide and % LEL of a combustible gas.
- Capable of sampling, viewing and data logging of instantaneous value, STEL and TWA readings.
- Environmental monitoring in the workplace atmosphere especially where pollutants or toxic gases are encountered.
