Key Features of Two Pack System with Inter -Coat Adhesion

• Excellent drying characteristics.
• Excellent inter -coat adhesion.
• Smooth abrasion resistance film of high surface quality.
• High film transparency, no haze formation.
• Excellent scratch, marr, Impact resistance with high Flexibility
• Resistance to stain of Tea, coffee, Alcohol spillage.
• High resistance to water fungus attack.
• No formation of hard sediments during storage
• Filling: The wooden surface or furniture to be coated must be dry and free from dust and loose particles. Prepare the smooth surface by sanding with Emery Paper No.180 followed by fine sanding with Emery No. 320. Clean the surface free of loose particles and dust.
• Apply wood filler with Putty knife or muslin cloth to smoothen minor unevenness of the surface and allow it to dry for 1-2 hours. Remove excess filler by Emery Paper
• Sealing: Apply one coat of Woodlux Natural Wood Finish clear sealer after mixing Base and Hardener with Thinner. Allow it to dry for 6-8 hours. Scuff it with Emery Paper No.320 to remove raised grains. If pores are still not filled, apply a second coat and follow the same step. Smooth sand the sealer coat after drying.
• Finish Coat: Select the finish coat available in Glossy or Matt; Semi-Glossy finish can be prepared by mixing Glossy and Matt in desired proportions.