Product Profile of Industrial Grade Jaw Crusher

Industrial grade jaw crusher is higher capacity stone or mineral processing crusher used in the primary and secondary stage of crushing. Jaw crusher is designed for the capacity range from 50 to 400 tph. Industrial grade jaw crusher shall be put into use for stones and minerals with varying crushing and abrasive index.

Key Features of Industrial Grade Jaw Crusher

• Advanced sensor systems for temperature and bearing condition monitoring
• Hydraulic CSS Setting System
• Automatic Lubrication System
• Bolt and lock system for 90% of the machine
• Can deliver a crushing ratio of about 1: 4 to 6
• Forged shaft with sub micron level machining
• Non-contact inspection procedures with cutting edge technology
• Finite element analysed crusher body
• Minimum welding so that the stress in the crusher is minimised
• Designed for the capacity range from 50 to 400 TPH
• Higher capacity stone or mineral processing crusher used in the primary and secondary stage of crushing
• Shall be put into use for stones and minerals with varying crushing and abrasive index
• Feed Material in its dry or semi dry form is fed into the receiving Hopper above the Jaw Crusher
• High vibration force of the feeder breaks any lumps of solids such as soil and other residues present along with the stone
• Residues fall off from the feeder via the grizzly fingers onto the scalping conveyor belt underneath
• Feed material is then fed into the jaw crusher where it first enters the feed opening
• Eccentric movement of the jaw stock against the material crushes it slightly so that it can move down the crushing chamber
• Material reaches almost the one third of the total height of the machine, it will experience maximum crushing force and get crushed into fragments
• Closed side setting of the machine is the actual setting the user may change from time to time depending on the size requirements