Product Profile of Phase Angle Control Relay
Phase angle control relay is designed to work on ac voltage. Angle control relay operates on the curent of 16 amp. Phase angle control relay has single operating channel.
Key Features of Phase Angle Control Relay
- Insulation Connectors to heatsink is 1500V RMS/Min
- Hysteresis 15% typical
- Full wave control
- Triac full wave AC
- Off State Voltage 400V
- Leakage Current 6mA
- Peak Single Cycle Surge Current at 50 Hz is 250 Amps
- Works on the curent of 16 amp
- AC voltage type
- Single operating channel
- Solid State Relay type
- Widely used for operating switches mechanically in different electronic devices and industries
- Low hysteresis effect
- High current capacity
- Rugged and compact
- Epoxy encapsulated
- Operates down to 100 mA
Product Specification of Phase Angle Control Relay
- Leakage Current:10 mA
- Input off voltage:1 VDC
- Reverse voltage protection:30 VDC
- Load Voltage ratings:25-330 VRMS
- Operating Frequency:47 - 63 Hz
- Input on voltage:32 VDC
- Output Current:3A
- Load Current:25 Amp
- Turn on/off time:10 microseconds
- Type:25 Amp
- Input Current:12 mA
- Operating Temperature:minus 30 to 80 degree Centigrade
