Product Profile of Industrial Grade Pure Steam Generator

Industrial grade pure steam generator is used to produce pyrogen free sterile steam for sterilization of fermentors, reactors, pipelines and autoclaves. Steam generator is also used for humidification of sterile area. Industrial grade pure steam generator provides high temperature operation that kills most of the disease causing bacteria.

Key Features of Industrial Grade Pure Steam Generator

• Free of Silica and Amines
• Sanitary triclover fittings for quick and easy preventive maintenance
• Provided with automatic control panel board with fault detection system
• Single Pre-Heater thus reducing the over-head costs and the size of the unit
• Two punch entrainment separation system for 100% results
• Centrifugal action forces the remaining microscopic droplets and impurities including the Endotoxins to the outer surface
• Vapour is free from heavy metal ions, oxidisables, ammonia and all particulate matter
• Designed a single Heat Exchanger which alone acts as a medium for heating the incoming feed water
• Boiler steam condensate is charged on the shell side of the Pre-Heater by the back pressure
• Concept of falling film evaporation in employed where by every single drop of water is converted to vapor
• Used for humidification of sterile area
• Used to produce pyrogen free sterile steam for sterilization of Fermentors, Reactors, Pipelines and Autoclaves
• High temperature operation that kills most of the disease causing bacteria
• Sterility of steam is completely governed by the separation of residual pyrogen entrenchment
• Includes evaporator, separator and pre-heater
• Shell and Tube Heat Exchanger fabricated from stainless steel
• Boiler Steam is supplied to the shell side of the evaporator where it condenses
• Latent Heat is transferred to the feed water flowing down on the tube side, which is thereby converted to vapor
• Separator makes the vapour move outside the tubes as it forced to change its direction to a 180 degree turn
• Specially designed spirals provided on the shell of the Evaporator force the steam to move in a circular path