Product Profile of E-Bike Analog Battery Charger
E-bike analog battery charger can be availed in lead acid or li-ion type. E-bike battery charger is protected from over voltage, short circuit, overload, reverse polarity etc. E-bike analog battery charger provides line and load regulation of 1%.
Key Features of E-Bike Analog Battery Charger
- Protected from Over voltage, Short circuit, Overload, Reverse polarity etc.
- Can be availed in lead acid or Li-ion type version
- Provides line and load regulation of 1%
Product Specification of E-Bike Analog Battery Charger
- Vibrations:10 – 500Hz 2G-10 min
- Operating Temperature:0 – 50 Degree C
- Input Voltage:170-300 V AC
- Ripple content:150mV p-p
- Dielectric strength Between Input and Output:2kV AC
- Under voltage at Input Cutoff at:140V AC. Cut in at 160V AC
- Mounting:Table top
- Operating Relative Humidity:0 – 80% Max
- Battery Voltage:48V/2.5A DC
- Output Voltage:48V/2.5A DC
- Over voltage at Input:Shut down above 300V AC
- Approx. Weight:500 g
- Dimension:160 X 90 X 60 mm
- Leakage Current:230 V AC < 2mA
- Over voltage at Output:59V
