Product Profile of Feeder Remote Terminal Unit
Feeder remote terminal unit is a telecontrol intended for remote monitoring and control of medium voltage switch gear equipments, disconnectors, load break switches and ring main unit in energy distribution networks. Feeder remote terminal unit consists of one rs232/rs485 port and one 10/100 ethernet port. Feeder remote terminal unit provides secure control and reliable control operations via scbo.
Key Features of Feeder Remote Terminal Unit
- 180 W breaking @ 30 VDC
- RJ45 for Ethernet, RJ45 for Serial port connection
- 1 x RS232/RS485 Serial Port with optional Modbus RTU /DLMS COSEM for energy measurement
- 12 Trip / Close 1 Form B contacts control output
- Ethernet Link Status and Port Speed indication
- Remote Configuration and Remote firmware upgrade
- 19 Optically isolated status inputs: 24 VDC or 48VDC with 10% overload
- 4-5 mA typical current burden per input indications
- Disconnected by terminal block for input
- 19 Status indication for Inputs and 12 Status Indication for command outputs
- Provides secure control and reliable control operations via SCBO
- Consists of one RS232/RS485 port and one 10/100 Ethernet port
- 19 Digital Inputs and 12 Digital Outputs
- Ethernet port for remote SCADA Connectivity
- RS232/RS485 Port for measuring device
- Web-based configuration
- IEC 60870-5-104 protocol for SCADA connectivity
- Supports multiple master on IEC 60870-5-104
- Optional Modbus RTU/DLMS COSEM for measuring devices
- DIN Rail mountable
Product Specification of Feeder Remote Terminal Unit
- Optical isolation:3 KV
- Dimension:385 mm x 136 mm x 50 mm
- Operating Temperature:0°C to 70°C
- Voltage:20 to 60 VDC
- Maximum power:10 W
- Current carrying capability:2 Amp
- Communication status indication:3 KV
- Humidity:5% to 95% RH Non-Condensing
- IP Rating:IP 20
Application of Feeder Remote Terminal Unit
- Distribution Transformer Monitoring
- Capacitor Bank Controllers
- Voltage Regulators
- FPI Automation Ÿ Recloser
- Substation Automation