Coating Pan with Control Pan is stainless steel made semi ellipsoidal size pan with a circular mouth for charging and discharging of tablets pan mounted at an inclination of ° to the horizontal. The Pan consists of a suitable HP 3 phase, 440 V, 1440 RPM TEFC motor with suitable worm reduction gear box and cone pulley arrangement to give three speed output. The Pan is provided with a hot air blower consisting of suitable hp 3 phase 440 V, 2880 RPM TEFC electric motor and centrifugal blower with damper delivering required CFM and the air is heated by means of suitable electric heater to give air at 30 to 90 ° heater with thermostat control and flexible hose pipe. The Pan is offered with suitable control panel with starters and push button to actuate the drive and for blower the circuits consists of MCCB, relays and contractors in series ample overload protection is provided by the MCCB and the relay wires coming out of the connections are numbered for easy recognition. The Coating Pan with Control Pan has the feature that the motor and gear box is mounted inside sturdy mild steel frame and the pan mounted on the gearing housing fitted in the stand and the blower mounted by the side of the stand or placed in remote location if required.
