Product Profile of Water And Fuel Filter

Water and Fuel Filter should be installed on the suction side of the fuel system, between the fuels feed tank and the engine mounted fuel lift pump. The Filter is designed in such a manner that ensures that fuel enters the filter through either port A or B depending on which is more convenient for installation, and using the plug provided to seal off the unused port. The Filter is designed to accommodate newer and more demanding diesel engines. The Filter is used in marine and agriculture industry and protects the engine from harmful impurities. The Filter is made using quality grade non corroding aluminium alloy casting, heavy polycarbonate or metal bowls and stainless steel hardware. The Filter is available from 80 GPH to 2060 GPH and allows element replacement while the engine is running. The Water and Fuel Filter has small physical size, high flow rate, low restriction, long life and has easier installation and 5 stage filtration.

Application of Water and Fuel Filter:

• Automotive industry: trucks, buses, mobile cranes, municipality vehicles etc.

• Construction equipment, compressor sets, agricultural equipment, fork lift trucks etc.

• Marine propulsion

• Stationary engines: stand by generators, welding and pumping installations etc.

• Mining applications




Key Features of Water And Fuel Filter

• Should be installed on the suction side of the fuel system, between the fuels feed tank and the engine mounted fuel lift pump.
• Designed in such a manner that ensures that fuel enters the filter through either port a or b depending on which is more convenient for installation, and using the plug provided to seal off the unused port.
• Designed to accommodate newer and more demanding diesel engines.
• Used in marine and agriculture industry and protects the engine from harmful impurities.
• Made using quality grade non corroding aluminium alloy casting, heavy polycarbonate or metal bowls and stainless steel hardware.
• Available from 80 GPH to 2060 GPH and allows element replacement while the engine is running.
• Small physical size
• High flow rate
• Low restriction
• Long life
• Easier installation
• 5 stage filtration
• Inlet/ outlet connections: 3/ 4 to 16 straight o-ring sae.
• This unit comes with one 10 micron filter.
• Maximum fuel flow litres/ hr 1080 or 40 LPM
• Port size: 26 1.5 mm
• Height: 385 mm
• Element removal: 60 mm
• Total height needed: 457 mm
• Depth: 165 mm
• Width: 200 mm
• Weight: 5 kg