Product Profile of Single Layer Printed Circuit Board

Single Layer Printed Circuit Board has thickness from 0.2 to 3.2 mm. The Board has line width and spacing of 6/ 6 mils. The Board has minimum drilled hole of 0.35 mm and minimum punched hole of 0.9 mm. The Single Layer Printed Circuit Board has finishing of UVSM/ PISM with lead and lead free hot air levelling.

Key Features of Single Layer Printed Circuit Board

• Thickness from 0.2 to 3.2 mm.
• Line width and spacing of 6/ 6 mils.
• Minimum drilled hole of 0.35 mm
• Minimum punched hole of 0.9 mm.
• Finishing of UVSM/ PISM with lead and lead free hot air levelling