Product Profile of Mica with 1.0 mm +/- 10% Thickness
Subhnen Decor Pvt. Ltd manufactures Mica with 1.0 mm +/- 10% Thickness. Subhnen Decor Pvt. Ltd offers Vitrified tiles, Mica, Veneers, Plywood, Furniture, wall tiles, Wooden flooring, Aluminum Panel Sheets, Canfor, etc. The Mica with 1.0 mm +/- 10% Thickness is used in top corporate architects, interior designers, etc.
Key Features of Mica with 1.0 mm +/- 10% Thickness
- Thickness: 1.0 mm ñ 10% 1.02
- Resistance to Surface Wear [Revolutions]: 350 Minimum 580
- Resistance to Immersion in Boiling Water: Mass -10% 0.0488
- Resistance to Dry Heat Should Pass Tests
- Dimension Stability at Elevated Temperatures [Cumulative Dimension Change]: Longitudinal - 0.6%
- Transverse: 1.0%
- Resistance to Staining: 3
- Resistance to Cigarette Burn: Should Pass Test
- Resistance to Steam: Should Pass Test
- Resistance to Cracking: Should Pass Test
- Resistance to Scratching: Load 2 N [min]
- Resistance to Impact by Small Diameter Ball: 20 N [min]
- Resistance to Colour: Change in Xeonarc
- Light in Enclosed Carbon Arc Light: Blue Standard
Product Specification of Mica with 1.0 mm +/- 10% Thickness
- Resistance:Resistance to Surface Wear (Revolutions): 350 Minimum 580
Resistance to Immersion in Boiling Water: Mass -10% 0.0488
Resistance to Dry Heat Should Pass Test
Resistance to Staining: 3
Resistance to Cigarette Burn: Should Pass Test
Resistance to Steam: Should Pass Test
Resistance to Cracking: Should Pass Test
Resistance to Scratching: Load 2 N (min)
Resistance to Impact by Small Diameter Ball: 20 N (min)
Resistance to Colour: Change in Xeonarc
- Transverse:1.0%
- Thickness:1.0 mm ± 10% 1.02
