Product Profile of Sine Wave Encoder With Pcb Connector
Sine Wave Encoder with PCB Connector can operate in a temperature range varying from -15 Degree C to +120 Degree C. The Sine Wave Encoder functions with high limiting frequency with good signal quality, allowing highest peak speeds and reduced non-productive time wastage. The Sine Wave Encoder offers high signal quality through control and error compensation. Sine Wave Encoder with PCB Connector has a sturdy construction that ensures optimum performance for longer period of time.
Khushali Enterprise manufactures Sine Wave Encoder with PCB Connector. Khushali Enterprise offers wide range of electrical components such as absolute encoder, encoders, rotary encoder, electric encoder, line protection devices, electronic speed switch, distribution boards and incremental absolute encoders. Khushali Enterprise is an ISO 9001:2000 registered company.
Key Features of Sine Wave Encoder With Pcb Connector
- Optimum performance
- Sturdy construction
- Longer functional life
- Wide operating temperature range of -15 Degree C to +120 Degree C, therefore optimum use of motor capacity
- High limiting frequency with good signal quality, allowing highest peak speeds and reduced non-productive time wastage
- Excellent immunity to interference (EN 61000-4-4, Class 4)
- High functional safety due to signal control and system monitoring (under-voltage, pollution, disc damage, end of LED service life)
- High signal quality through control and error compensation
Product Specification of Sine Wave Encoder With Pcb Connector
- Shaft:Axial endplay of mounting shaft (hubshaft) : ± 0.5 mm & Radial runout of mating shaft (hubshaft) : ± 0.1 mm
- Shaft Diameter:Cone 1/10
- Weight:approx. 170 g
- Housing diameter:53 mm
- Housings:Protection class housing (EN 60529) : IP40 & Material housing : Aluminum
- Input:Protection class shaft input (EN 60529) : IP40
- Maximum Speed:Max. 12 000 rpm (continuous), max. 15 000 rpm (short term)
- Operating Temperature:-15 ( °C ) ... +120 ( °C )
- Shock resistance:Shock resistance (DIN EN 60068-2-27) : ≤ 1,000 m/s² (6 ms)
- Storage Temperature:-20( °C ) .... +80( °C )
- Torque:≤ 1 Ncm
- Vibration Resistance:Vibration resistance (DIN EN 60068-2-6) : ≤ 100 m/s² (10 ... 2,000 Hz)
- Frequency:3dB limiting frequency : 500 kHz
- Connection:PCB connector and cable
- Design:General design : As per DIN EN 61010-1, protection class III, contamination level 2, over voltage class II
- Supply Voltage:DC 5 V ±10 %
- Signals:Reference signal R : > 0.4 V (1 pulse per revolution)
- Accuracy:Absolute accuracy : ± 35"
- Repeatability:± 7"
