Product Profile of Incremental Encoder With Hub Shaft
Incremental Encoder with Hub Shaft is extensively used in motors, printing machines and lifts. The Incremental Encoder can operate in a temperature rate of up to 100 Degree C. The Incremental Encoder is available in outside diameter of 76 mm and is featured with cable, radial connection. Incremental Encoder with Hub Shaft can be easily installed with front or rear type clamping ring.
Khushali Enterprise manufactures Incremental Encoder with Hub Shaft. Khushali Enterprise offers wide range of electrical components such as absolute encoder, encoders, rotary encoder, electric encoder, line protection devices, electronic speed switch, distribution boards and incremental absolute encoders. Khushali Enterprise is an ISO 9001:2000 registered company.
Applications of Incremental Encoder with Hub Shaft:
Key Features of Incremental Encoder With Hub Shaft
- Outside diameter only 76 mm
- Can be easily installed with front or rear type clamping ring
- Operating temperature up to 100 Degree C
Product Specification of Incremental Encoder With Hub Shaft
- Flanges:Flange (Mounting of housing) : Tether
- Housing diameter:76mm
- Housings:Protection class housing (EN 60529) : IP50 (IP65 optional)
- Input:Protection class shaft input (EN 60529) : IP40 or IP64
- Length:Minimum length of mountig shaft clamping ring front : 32 mm with Ø 15 ... 30, 35 mm with Ø >30 ... 42 & Mimimum length of mounting shaft clamping ring rear : Corresponding to total length of encoder
- Maximum Speed:For Ø 15 ... 25 mm at 70 ° C and IP64: max. 3600 rpm, For Ø >25 ... 42 mm bei 70 °C and IP64: max. 1800 rpm , For Ø 15 ... 42 mm at 70 °C and IP40: max. 6000 rpm , For Ø 15 ... 42 mm at 100 °C always: max. 1800 rpm
- Moment of Inertia:Approx. 140 ... 420 gcm² (depending on version)
- Shaft:Mounting of shaft : Front clamping ring, Rear clamping ring , Axial endplay of mounting shaft (hubshaft) : With stator coupling A (flexible): ± 2 mm, With 1x stator coupling (torsionally rigid): ± 0.5 mm , With 2x stator coupling (torsionally rigid): ± 0.3 mm
- Shaft Diameter:15 mm / 16 mm / 18 mm / 20 mm / 24 mm / 25 mm / 27 mm / 28 mm / 30 mm / 32 mm / 38 mm / 40 mm (Hub shaft)
- Shock resistance:Shock resistance (DIN EN 60068-2-27) : 100 g = 1000 m/s² (6 ms)
- Torque:3 ... 10 Ncm (depending on version)
- Vibration Resistance:Vibration resistance (DIN EN 60068-2-6) : 10 g = 100 m/s² (10 ... 2000 Hz)
- Operating Temperature:-25 °C... +100 °C
- Weight:320 ... 580 g (depending on version) approx
- Storage Temperature:-25 °C... +100 °C
- Housing Material:Aluminum
- Connection:Cable, radial
