Product Profile of Oxidized Bitumen Membrane With Non-Woven Polyester Re-Enforcement

Oxidized Bitumen Membrane with Non-Woven Polyester Re-enforcement is an oxidized bitumen waterproofing membrane suitable for application by gas torch or with hot bitumen and the multi-layered design provides good pliability, tensile strength, workability and resistance to climatic conditions. The Membrane consists of a non woven polyester reinforcement, impregnated and coated on both sides with oxidized bitumen. The Membrane forms an impervious waterproofing blanket which accepts normal structural movement without breaking or cracking. The Oxidized Bitumen Membrane with Non-Woven Polyester Re-enforcement has black finish with thin, heat fusible, polyethylene film on both sides and is installed by torch welding method, loose-laid or fully bonded to substrate and when loose-laid, only laps are bonded together.

Key Features of Oxidized Bitumen Membrane With Non-Woven Polyester Re-Enforcement

• Oxidized bitumen waterproofing membrane suitable for application by gas torch or with hot bitumen and the multi-layered design provides good pliability, tensile strength, workability and resistance to climatic conditions
• Consists of a non woven polyester reinforcement, impregnated and coated on both sides with oxidized bitumen
• Forms an impervious waterproofing blanket which accepts normal structural movement without breaking or cracking
• Black finish with thin, heat fusible, polyethylene film on both sides and is installed by torch welding method, loose-laid or fully bonded to substrate and when loose-laid, only laps are bonded together.
• Nominal roll length: 10 m.
• Nominal roll width: 1 m.
• Nominal thickness: 3, 4 or 5 mm.
• Good resistant to fatigue and tear
• Good bond ability and seam integrity
• Impact and puncture resistant