Product Profile of Air Cooled Type Oil Testing Kit

Air Cooled Type Oil Testing Kit is ideal for speedy and accurate testing of Di-electric strength of transformer and circuit breaker oil under test room condition. The Oil Testing Kit operates on single phase input of 230 volts, 50Hz, AC. The Oil Testing Kit provides continuously variable output ranging from 0 to 50 Kv `or` 0 to 60 Kv or 0 to 100Kv. The Air Cooled Type Oil Testing Kit is designed with a capacity range of 1000VA [1KVA].

Neon Controls is manufacturing Air Cooled Type Oil Testing Kit. Neon Controls supplies a wide range of instruments catering to Power Factor Control, Power and Energy Management and Power Factor Management. The range of products include Digital Panel Meter, Set point Relay, Automatic Power Factor Control Relay , Power Factor Control Relay, Digital Voltmeter, Digital Ammeter, Earth Resistance Tester, Multifunction Meter, Energy Meter, Tap Position Indicator, Relay Test Set, Oil Testing Kit, Voltage Test Set, Current Injection Sets etc. Neon Controls is an ISO 9001:2008 accredited company.

Key Features of Air Cooled Type Oil Testing Kit

• One continuously variable Auto-Transformer for smooth variation of output voltage
• Beside the ON/OFF switch, fast acting Automatic tripping mechanism for protection of H. T. transformer against overloading on flash over
• One zero start interlocking device
• Three pilot lamps to indicate mains "ON", H.T. "ON" & H.T. "OFF"
• One Input supply cable with 3-pin plug
• One memory effect voltmeter to show the breakdown voltage even after the high voltage circuit is tripped off
• Mode of operation: Sets are available either in manual or in motor operated mode. Beside motorized auto transformer regulator for motorized set, motor operated Auto-transformer, can be operated in manual through switch
• H. T. Transformer: High Voltage Transformer ratio is 230V/50Kv or 60kv or 100kv or 120kv with centre tap HV winding earthed
• Test Vessel: The test vessel (Oil cell) fitted with two brass spheres of diameter between 12.7 to 13mm, placed at a distance of 4mm or 2.5mm on sides of test vessel made from non-absorbent insulating material
• Cover: Sets will be provided with transparent high impact acrylic sheet cover for covering the H. T. side with suitable interlocking device