Product Profile of Ultra Nupave Floor Coating
Ultra NuPave Floor coating is a flexible, tough, hard wearing, one-pack coating, UV stable, zero-low VOC, nil odour electrometric one way membrane. It has application properties with excellent even spreading of non-slip silica ingredients. It is non-toxic and fast drying. It is Chemical/ Stain/ Fire/ fungus/acid & alkaline resistant. It is colour fast, zero smoke toxicity & Heat resistant. It will not yellow or harden with age. It has waterproofing properties and withstands aggressive scrubbing. It has High film build ability, impact resistant and high abrasion qualities.
Ultralast Green Coatings Pvt Ltd. Manufactures Ultra NuPave Floor coating.Ultralast Green Coatings Pvt Ltd. Is the supplier of conventional paints and painting products for water based penetrating primer, cleaner, sealant, acrylic-based floor screed and wood preservative for residential as well as commercial complexes.
Applications of Ultra NuPave Floor coating:
- Restaurants or Cafes can be painted directly over vinyl or ceramic tiles in high-traffic areas where health and safety are paramount
- Public walkways or thorough fares, bike paths
- Ideal grip is provided without the risk of too rough a surface that may tear skin should a fall occur
- Factories or Food production - a courser version is available where food fats and oils create build up on factory floors
Key Features of Ultra Nupave Floor Coating
- High film builds to cover irregular surfaces
- Good impact resistance
- Suitable for floor surfaces
- Good waterproofing qualities
- Has good amount of abrasion resistance and is ideal for vibrating structures like bridges and airports
- Non-toxic and no VOC
Product Specification of Ultra Nupave Floor Coating
- Colour:any
- Drying Time:At 20 ( °C ) and 1mm - Touch dry (30 minutes) Full cure (24 hours)
- Finish:Matt
- Flash Point:Waterborne and not flammable
- Shelf Life:Shelf and Pot life : 2 years +
- Solids:Solids(%) by Mass : Minimum 90% , Solids (%) by volume : Minimum 95%
- Solvents:Water
- Storage:Storage and application: Room (moderate) temperature, tightly closed (sealed)
- Thickness:Minimum of 1 mm
- Rate:Spreading Rate: 1 litre per m2 at 1mm thickness (recommended)