Product Profile of Fluid Bed Dryer For Pharmacy Industry
Fluid Bed Dryer for Pharmacy Industry has the atmospheric air is drawn through air filter, the filtered air is then heated to the required temperature by electric/ steam radiator and it has a filter bag and a damper that prevents fine particles from carrying over to exhaust air stream and controls air circulation respectively. The Fluid Bed Dryer has optional hinged swing type retarding chambers, bucket type bottom chamber above ground level and spray granulation. The Fluid Bed Dryer is provided with fully automatic control panel box with process timer, pneumatic finger bag shaking, pneumatic lifting of container, digital temperature controller cum indicator, voltmeter, ammeter, earthling system etc and the contact parts made of stainless steel. The Fluid Bed Dryer has steam consumption rate ranging from 14 to 200 kg/ hr at 3 kg cm pressure and requires motor ranging from 1.5 to 25 hp. The Fluid Bed Dryer has containers of various capacities ranging from 35 to 950 litres and has rear chamber with heating coils and air inlet filter modules to be mounted in remote areas. The Fluid Bed Dryer for Pharmacy Industry is designed with safe earthling arrangement and inlet-air filtration system with 0.3 micron hepa filters.
- Specifications of Fluid Bed Dryer for Pharmacy Industry:
- Consumption rate ranging from 14 to 200 kg/ hr at 3 kg cm pressure
- Requires motor ranging from 1.5 to 25 hp
- Containers of various capacities ranging from 35 to 950 litres
Application of Fluid Bed Dryer for Pharmacy Industry:
- Used in chemical, food, dyestuff
- Polymer industries for fast and efficient drying.
Key Features of Fluid Bed Dryer For Pharmacy Industry
- Optional single piece retarding chamber and finger bag chamber with imported inflatable seals
- Optional hinged swing type retarding chambers
- Bucket type bottom chamber above ground level
- Spray granulation
- Pneumatic lifting and locking for item container with retarding chamber
- Heating by electricity, steam/ thermic fluid or diesel oil.
- Fully automatic bag shaking
- Safe earthing arrangement
- Inlet-air filtration system with 0.3 micron hepa filters
- Rear chamber with heating coils and air inlet filter modules to be mounted in remote areas
- Fan motor unit to be mounted in remote areas
- Stainless steel interconnecting duct lines with flanges for connecting remote mounted heating and fan motor modules
- Noise level below 90 db with silencer
- Microprocessor based control panels with time v/ s temperature controls, batch programming, batch data print out
- Due to induced draft created by specially designed heavy duty fan, the atmospheric air is drawn through air filter. The filtered air is then heated to the required temperature by electric/ steam radiator.
- The hot air passes through the product container and the product gets dried by air fluidisation.
- The air circulation is controlled by damper.
- The filter bag prevents fine particles from carrying over to exhaust air stream.
