Key Features of Led Destination Board Display System

• Comes with One number of master destination display unit which shall be mounted outside the coach for viewing by embarking passengers at the platform itself.
• Equipped with One slave destination display unit which shall be mounted on the other side of the coach to enable viewing either by passengers in adjoining platform or in train parked there.
• Two numbers of VHF wireless remote control/ programming units per rake for data entry/ programming by C&W staff to the master/ slave destination display systems.
• The 100 Train routes along with GPS parameters/ display images shall be loaded from PC to VHF remote unit through relevant RS 232 port.
• The LED Destination Display Units mounted on the train coaches can be controlled by sending a single radio command from the Programmable remote control unit.
• The master control unit can communicate through VHF wireless media to and fro from remote control unit for transferring data at the speed of 1200 bauds.
• Each Display Unit is identified digitally with an alpha numeric character of the coach number.
• Train route selection on coach control units shall be done using remote unit.
• The Radio receiver built in the LED display unit receives the radio signals through the remote control unit through a VHF radio modem.