Product Profile of Belt Conveyor System with Vulcanized Belt Joint
Belt Conveyor System with Vulcanized Belt Joint is used for carrying bulk load material either on horizontal or inclined paths. The Belt Conveyor System is available in various types such as stationary portable and mobile conveyors which can easily carry bulk load along inclined paths. The Belt Conveyor System has the capacity to bear loads up to 50kg at speed that ranges from 5m/ min to 60m/ min. Belt Conveyor System with Vulcanized Belt Joint produces low noise and facilitates belt change within 30 minutes.
Key Features of Belt Conveyor System with Vulcanized Belt Joint
- Sturdy solid framework.
- Standard range of modules.
- High density conical end rollers.
- Two Ply non mono belting.
- Vulcanized belt joints.
- Positive belt guiding system.
- Produce Low noise.
- Facilitates belt change within 30 minutes.
- Rollers for easy location and mobility.
- Provided with a friction belt under the roller, which gives a conveying surface and reduce the chances of off tracking and damage to the belt that can happen due to direct contact.
- Pressure rollers can be adjusted to reduce pressure.
- Belt speed ranges from 30 to 100 FPM.
- Travel direction can be reversed in units up to 100 feet in length and has a centre drive.
- Centres are 2.4", 3", 4" and 6", multiples may be provided according to specifications.
- Standard frame widths are 12", 15", 18", 21", 24", 30" 36", 42" and 48".
- The spring loaded rollers are 1.9" in diameter by 16 GA. with 7/ 16" hex axles, on required centres.
- Accumulation beds are available.
