Key Features of Heavy Duty Radiation Proof Sliding Door

• Layers of water boiling proof plywood, in between a number of lead sheets each 2 or 3 mms thick.
• The door leaf on both sides finished with hard plastic laminate in a plane colour out of the actual collection of Formica or equal manufacturer.
• The door edges finished with 2 mm thick U-shape stainless steel section.
• At the bottom of the door blade on the non-rail side a stainless steel plinth approx. 80 mms high is placed to protect it from damaging.
• On the rail side of the door blade, at the bottom, a stainless steel guiding profile is placed in front of the door leaf over the total door width, including a U-section and a 45° sloping cover as bottom guide. Bottom guiders inside the U-channel are made of heavy duty nylon.
• Overlap of the door leaf on the frame is 100 mm on each.
• The door leaf to be provided with a strip of intumescing material.
• Thickness of the door leaf is 155 mm.
• Heavy suspension brackets, each with 2 steel - sealed for life - roller bearings. These bearings to be placed under an angle of 90degree in regarding to each other and under 45degree in regarding to the wall and the floor.
• A plate is placed over the full door width, to cover these suspension brackets.
• The total weight of the door blade depends on the lead lining and as per specific requirements.
• Widely used in radio therapy room and X ray rooms.
• A safety edge is provided on the head of the door leaf.
• Is specially constructed with lead shielding to protect both hospital employees and patients from unnecessary harmful rays.
• Well sealed which prevents cross contamination and thus helps in maintaining sterility.