Product Profile of Auger Boring Machine With A Hydraulic Clutch
Auger Boring Machine with a Hydraulic Clutch is used to bore horizontally through soil or rock with a cutting head and auger. The Boring Machine is used to install pipe casing that cannot be open cut or disturbed in any way. The Boring Machine consists of many types of cutting attachments for this machine with a steel made backing plate which is installed in the wall opposite of the boring to withstand the thrust exerted by the boring machine. Auger Boring Machine with a Hydraulic Clutch can bore through a variety of ground conditions and can excavate sand, gravel, clay, and rock of any type.
Key Features of Auger Boring Machine With A Hydraulic Clutch
- Hook Roller Safety Locks: Assures the machine is locked into the track without manual hook up
- Robbins Rapid Split: Allows for fast removal of the power unit from the ABM base for shut down or in case of potential flooding of pit. All major components are taken out of pit without disturbing casing alignment or machine set up
- Hydraulic Clutch: Ease in operating the clutch and has smooth engage and disengage movement. Note: May be unhooked for manual operation
- Electronic Anti-tilt Switch: Aids in the emergency shut down of a potential roll over situation of the ABM. Note: Does not prevent roll over
- Pushbar Engagement Indicator: Enables the operator to see that push bar dogs are locked into the holes on the track
- Proportional Controls: Ease in operating the hydraulic functions
- Running Lights: Allow the operator to see the subject even through the late shifts
- Tool Box: Is a large sized storage box mounted on the master pusher for ease and availability of common hand tools used in the bore pit
- Winch: Is used for retracting the ABM to original starting position to add another piece of casing Note: This winch is not to be used to pull augers, casing, etc
- Vandalism Shield: Acts as a cover for the ABM to repel weather and vandals from damaging the ABM when not in use
