Product Profile of General Purpose Hard Coat Quick Drying Interior Enamel

General Purpose Hard Coat Quick Drying Interior Enamel is available with 10-12 Sq. Meters per litre per coat covering capacity. The Quick Drying Interior Enamel is available in mainly white and black colour. Glossy Color And Paint Pvt. Ltd manufactures General Purpose Hard Coat Quick Drying Interior Enamel.

Glossy Color And Paint Pvt. Ltd, an ISO 14001:2004 and ISO 9001awarded company, supplies wide ranges of interior wall paint, exterior wall paint, protective coating, metal paint, furniture paint, wood finishes, heat resistant paints etc. The General Purpose Hard Coat Quick Drying Interior Enamel is available in minimum 35 degree C flash point.

General Purpose Hard Coat Quick Drying Interior Enamel has the following features:

• Thinning: The enamel is ready for use for brushing. For spraying and Glossy`s Synthetic Thinner to reduce the viscosity 40-50 seconds.

• Finish: Hard and tough protective film with a high degree of gloss.

• Application: By brush/Roller/Spray.

• Covering Capacity: 10-12 Sq. Meters per litre per coat on a prepared surface.

• Drying Time: Surface Dry 1-2 hours. Hard Dry 3-5 Hours. Tack Free : 8-12 hours. [Depending on the conditions of temperature and humidity]. Recoatable after 3-5 hours.

• Colour Range: Vast Range of colours including White and Black.

• Flash Point :Above 35 degree C.

• Undercoats :grey/white primer : Red Oxide M Primer.


Applications of the General Purpose Hard Coat Quick Drying Interior Enamel:

• Steels castings.

• Wood.

• Plaster.

• Asbestos to be used Indoor.