Falling Film Evaporators for Thermo Sensitive Fluids allow the solution to be evaporated flow inside the tubes of a vertically arranged tube bundle. A special liquid distribution system at the top ensures an equal liquid feed to each tube and ensures that an even liquid film is obtained on the circumference of each tube. The flow of liquid per tube is called the wetting rate. Higher feed concentrations require higher wetting rates to prevent over concentration and fouling. Falling Film Evaporators for Thermo Sensitive Fluids is supplied by JMD Sonic Engineering Private Limited.
JMD Sonic Engineering Private Limited manufactures different types of equipment like Evaporators, CIP Systems, Spray Drying Systems, Plate Heat Exchangers, Bulk Milk Coolers, Sanitary Pumps, Spray Drying Plants, and many more. In the Falling Film Evaporators for Thermo Sensitive Fluids, the heating fluid for evaporation is introduced outside the tubes in the shell and is generally steam or vapour. The vapour generated by the evaporation is separated from the concentrated liquid at the bottom of the vessel and goes through a droplet separator which can be either integrated into the evaporator shell or separated with a vapour connection and a highly efficient cyclone inlet. The most common type of evaporator. Well adapted for thermo sensitive fluids.
