Key Features of Water-Proof and Anti-corrosion Coating System

• Single Component System, provides tough, hard wearing surface with waterproofing.
• One Coat application [200-300 microns] sufficient for most applications. However, for safety two coats are recommended. It can be applied in uniform thickness to horizontal and vertical surfaces.
• Resistant to most dilute acids, alkalis, salts, oxidising agents, mineral oils, moisture and fungus growth.
• Develops excellent bonds and adheres to most substrates e.g. concrete, masonry, metal, wood, plastics etc.
• Produces tough, flexible film which is extremely impermeable, thereby minimising diffusion of oxygen, water and salts. Also it prevents peeling and bubbling.
• Withstands temperatures from - 20°C to 80°C.
• Fast drying - surface dry in 2-3 hours depending on applied thickness and substrate- Possible to apply in wet season, and on wet surfaces.
• Resistant to sunlight. White colour coating would tend to yellow slightly but without any damage to its properties.
• No primer is required if instructions on surface preparation are followed strictly.
• Any substrates where problem of corrosion and water proofing occurs.
• For roofs, terraces, basement, kitchen, walls, bathroom, warehouse, hospitals, instruments & computer room, food and chemical processing plants, breweries, etc.
• Also used in land based steel structures of all types, swimming pool, potable water tanks, parking garages, industrial floors, Reservoirs, Canals, Dams, Water towers, Tunnels, Sewers, Biogas plant, etc.