Product Profile of Light-Brown Mould Releasing Agent
Light-Brown Mould Releasing Agent is a ready-to-use thin liquid suitable for smooth, non-absorbent form for working steel, plastic, wood or modified wood, glass fibre etc. The Agent once applied and dried, acts as a protective coat and there is no harmful effect over it due to strong pelting rain, water or moisture. Asian Laboratories an ISO 9001:2000 certified company manufactures Light-Brown Mould Releasing Agent.
Asian Laboratories supplies a wide range of construction chemicals like water reducing admixtures, water proofing products, air entraining agent, grouts and anchoring systems, repairs and maintenance chemicals, etc. Light-Brown Mould Releasing Agent provides improved surface finish with effective non-staining clean concrete surface.
Key Features of Light-Brown Mould Releasing Agent
- Excellent release performance.
- Provides improved surface finish with effective non staining clean concrete surface.
- Minimises air-pockets end entrapped air on the concrete surface.
- Suitable for all types of form work, steel moulds and even for absorbent shutter-rings.
- Can be used in pre-cast and steam curing work.
- Thin fluid consistency allows even appliĀcation and minimises adhesion of released film, thereby cleaning effort is much less for reuse of form work.
- Appearance: Free flowing clear light-brown liquid.
- Density: 0.83 ± 0 02.
- Flash Point: Above 65°C.
- Temperature Effect: Suitable for application in tropical areas and for use with steam cured concrete.
- Performance: Highly effective in releasing form work, does not stain concrete, improves surface finish andean be used with white cement.
- Storage life: At least one year. The sealed barrels should be stored in the shade because the barrels kept near fire or in the blazing sun develops pressure inside the barrels.
- Handling: Being solvent - containing material, it should be handĀled with gloves. Any splashes on the skin should be washed with soap and water.
- Coverage: 20 to 60 ms per litre. The coverage largely depends on the way of handling, porosity and texture of the form-work of the mould surfaces.
- Packing: 200 litres steel barrels.
Product Specification of Light-Brown Mould Releasing Agent
- Appearance:Free flowing clear light-brown liquid.
- Density:0.83 ± 0 02
- Flash Point:Above 65°C