Product Profile of Faceting and Polishing Machine with Single Facetor
Faceting and Polishing Machine with Single Facetor has ¼ hp. 1440 r.P.M. Single-phase 220 volts motor that is fixed on a removable base plate. The Machine base is made up of cast iron and is fixed with zinc coated steel legs and check nut to help in maintaining proper balance on any surface. Faceting and Polishing Machine is manufactured by Anand Engineering Works.
Anand Engineering Works offers a wide range of Lapidary machineries, equipment, raw materials, etc. Faceting and Polishing Machine of Product Code AEW PFID has two housings that contain two separate shafts driven by the same motor but both these shafts can also be rotated in different directions with the help of an idler pulley.
Key Features of Faceting and Polishing Machine with Single Facetor
- This machine is capable of simultaneous faceting and polishing and therefore saves precious time of changing laps for faceting and polishing.
- The indexing attachment is fitted on the dope stick itself and as such this affords a full view of the stone.
- Very sturdy base - the naked base alone weighs over 15 Kgs. This results in much greater stability and vibration free operation of the machine.
- Since the faceting and polishing is being done with the same Facetor on the same base, the problems, of misalignments are not faced. The facets are fully polished in exactly the same way as they have been cut.
