Product Profile of Turbo Dryer for Production of Oxygen/ Nitrogen

Turbo Dryer for Production of Oxygen/ Nitrogen delivers uniformly dried product because material is intermittently redistributed with plug-flow operation. There is uniform temperature inside or zoned temperature regions in the dryer. Turbo Dryer for Production of Oxygen/ Nitrogen is supplied by BDM Cryofusion & Mandressi Italia.

BDM Cryofusion & Mandressi Italia is an ISO 9001-2000 certified manufacturer of Low Pressure Turbo Series of Oxygen/Nitrogen Plants, Tonnage Series of Oxygen/Nitrogen Plants, Medium Pressure Oxygen/Nitrogen Plants, Liquid Series of Oxygen/Nitrogen Plants, etc. The closest product temperature control of any dryer is made possible through the Turbo Dryer for Production of Oxygen/ Nitrogen.

Technical Specification of Turbo Dryer for Production of Oxygen:

• For Oxygen Production

• Oxygen Output [in cu.M/hr]: 40 to 1000 cu.M/hr.

• Oxygen Purity: 99.6%.

• Oxygen pressure in cylinders: 150 bar[kg/cm2]


For Nitrogen Production:

• Nitrogen Pressure out of Column [bar]: 5 bar [up to 150 bar optional].

• Nitrogen Output [cu. Mtr/hr]: 40 to 1000 cu.M/hr.

• Nitrogen Purity [ppm optional]: 99.9% to 99.99% [3ppm opt.]

• Nitrogen filling in cylinders [optional]: 150 bar [kg/cm2]

• Type: Low Pressure.

• Operational Pressure: 7 bar [kg/cm2].

• Operational period: 24 hours continuous.

• Screw Compressor: Rotary/Screw.

• Expander: Turbo.

• Downtime for repair: Very low due to screw compressor and low working Pressure there are no leakages.

• Air separation unit: High yield >99%.

• Exchanger efficiency [plate fin type]: Very High

• Oxygen & nitrogen production: Simultaneous [no loss of oxygen].

• Power: Connected: As per capacity.

• Consumed: As per Model.

• Specific power per m3 of oxygen: Up to 0.6 Units Depending upon the Capacity.

• Specific power per m3 of oxygen + nitrogen [pure]: 0.4kwh [units].

• Voltage 3 phase: 380-415 50/60 Hz.