Product Profile of Abrasion Testing Machine with Horizontally Mounted Cylinder

Abrasion Testing Machine with Horizontally Mounted Cylinder operates on 440 volts, 3 phases, 50 cycles A.C. Supply. The Abrasion Testing Machine is provided with a detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. Shambhavi Impex manufactures Abrasion Testing Machine with Horizontally Mounted Cylinder.

Shambhavi Impex supplies wide ranges of oven, incubator, furnace, water bath, autoclave, water still, stirrer, hot plate, heating mantles, centrifuges, point apparatus, humidity cabinet, etc. The Abrasion Testing Machine with Horizontally Mounted Cylinder is supplied with a tray for collection of the material at the end of the test.

Abrasion Testing Machine with Horizontally Mounted Cylinder has the following features:

• The machine consists of a hallow cylinder mounted horizontally on a sturdy frame on ball bearings.

• There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test.

• A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover.

• The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.P.M.

• A revolution counter is fitted to the frame.

• A tray is supplied for collection of the material at the end of the test.

• Complete with abrasive charges consisting of a set of twelve hardened steel balls, approximately 48mm diameter.

• Suitable for operation on 440 volts, 3 phase, 50 cycles, A.C. Supply.