Product Profile of Grinder with One-Piece Rotor

Raj Engineering Works manufactures Grinder with One-Piece Rotor. The Grinder with One-Piece Rotor is available in 5 models. The lengths of the rotors are 10", 13", 15", 18" and 24".

Raj Engineering Works is the supplier of extruder, high speed mixer, grinder, pelletizer, agglomerator, caterpuller, torque winder, etc.

The specifications of Grinder with One-Piece Rotor are:

• Rotor: The one-piece rotor is made from Mild Steel and accurately machined to enable Dynamic Balancing.

• Chambers: Made of Thick Mild Steel Plates. Side Parts: Made of good quality Cast Iron. Mild Steel is used in case of Grinders above 15" size. Rotor is housed in the side parts by means of heaving duty bearings.

• Blades: Are H.C.H.C. [High Carbon High Chromium] tipped with a hardness of 60 on the Rockwell C Scale. Blades are fitted by means of high-tension bolts. Fixed Blades are housed in the Chambers and are provided with adjusting bolts. Also provided is a separate arrangement to lock the blades in place and prevent their dislocation even when subjected to heavy operating loads.

• Bottom Screen: Made of Mild Steel Plate and provided with perforated holes.

• Collecting Bin: Made of Galvanized Steel.




Key Features of Grinder with One-Piece Rotor

• Type: RG-10, RG-13, RG-15, RG-18, RG-24
• Feed Opening: 4" X 10", 6" X 13", 6" X 15", 10" X 18", 10" X 24"
• Length of Rotor: 10", 13", 15", 18", 24"
• No. of Rotor Blades: 3
• No. of Stationary Blades: 4
• Speed [rpm]: 1000, 900, 900, 750, and 750
• H.P. of Motor Drive: 3, 7.5, 10, 15 and 25
• Output: 10-30 kg/hr, 40-60 kg/hr, 60-80 kg/hr, 70-150 kg/hr and 100-225 kg/hr