Shree Engineers is the manufacturer of Stainless Steel 9" Dewatering Screw Press. In Stainless Steel 9"Dewatering Screw Press, the screw trough is 14" side with a dogged lid for easy access and cleaning. The screw is 9" diameter X 5` long with a 14 mesh screen to capture solids surrounding it. Solids are driven up and discharged at a height of 74" through a 10.5" X 15" opening. The liquids drain to the bottom of the screw and discharge through a 6" flanged fitting. The fitting is currently reduced to 3" flanged fitting. The screw is belt driven at 1 to 1 ratio by 7.5 hp 1750 rpm electric motor. The screw is fed by 225 gallon tank through a 10" flanged fitting. The tank is open top and measures 36" diameter x 48"straight side height with 9" cone bottom. The cone bottom has a 4" hand operated slide gate valve in center.
Shree Engineers supplies Chemical Process Pumps, Centrifugal Sludge Pumps, Screw Press, Coarse Grinder, Fine Grinder, De-Germinator machine [Nevada], Seed Cleaning Machine, Sifters, Roasters, etc. Under brand name PEMA. The Stainless Steel 9" Dewatering Screw Press also has a covered 10" flanged fitting on bottom side of tank. There is an 18" long 2" flanged piped that exits about 1/3 from the bottom of the tank. There are also [2] 4" flanged fittings on the top side of the tank. The unit requires 230/460 VAC 3 PH electrical supply.
