Product Profile of Two Component Polyurethane Casting/Potting Compound
The Two Component Polyurethane Casting/ Potting Compound, under the model AlproCast 1000 is generally used for jointing power cables. The Two Component Polyurethane Casting/ Potting Compound, on mixing with Hardener at ambient temperature results in a hard, flexible cured mass with a low exothermic rise in temperature. Lympro Chem Pvt. Ltd. Is manufacturing.
Lympro Chem Pvt. Ltd. Supplies Polyurethane Foam, Potting Compounds, Sealant, Water Proofing Compounds, Polyurethane Coating, Polyurethane Elastomers, Epoxy and Hardener, etc. The Two Component Polyurethane Casting/Potting Compound is ideal in jointing kits for PILC, XLPE, Rubber cables as well as high tension systems and insulators. AlproCast is also widely utilized for encapsulating electrical appliances.
Key Features of Two Component Polyurethane Casting/Potting Compound
- Good electrical [insulating] properties
- Excellent resistance and resiliency to absorb and dissipate the mechanical stresses and the heat arising from the internal joints in the power conductor
- Water tight seal
- Excellent hydrolytic stability
- Appearance: Red viscous liquid
- Density at 25 Degree C: 1.30 + 0.10 g/cc
- Flash Point: more than 175 Degree C
Product Specification of Two Component Polyurethane Casting/Potting Compound
- Appearance:Red viscous liquid
- Compressive Strength:5
- Density:1.30 + 0.10 g/cc (@ 25°C)
- Dielectric Strength:Minimum 15 KV/mm (@ 27 / 80°C)
- Flash Point:> 175
- Impact Strength:5 kJ/ m²
- Volume Resistivity:Mimimum 1 x 1012 ohm.cm
