Product Profile of Programmable Event Counter with 5 Digit 13 mm Display
Programmable Event Counter with 5 Digit 13 mm Display is manufactured by Systech Automation Systems. Systech Automation Systems also manufactures various types of signal isolators, process indicators, process scanner, alarm annunciators, process calibrators, transmitter power supply, pressure instruments etc. Programmable Event Counter with 5 Digit 13 mm Display comes with two independent set points programmable in 3 different control actions, like normally on, normally off, pulse output. This Programmable Event Counter comes with two independent set point.
Programmable Event Counter with 5 Digit 13 mm Display has the following features:
- Auto resolution R.P.S. Or R.P.M.
- R.P.S. [Revolution per second or pulse per second] or R.P.M. [Revolution per minute or pulse per minute] user selectable.
- 2 Nos. LED used for RL1 [Alarm1] & RL2, [Alarm2].
- 11.059 MHz quartz crystal for high accuracy.
- Two independent set points programmable in 3 different control actions, like normally ON, normally OFF, pulse output.
- Built-in watch-dog circuit for fail safe operation.
- Relay output for each set point with NO / C / NC output.
- +12VDC, 50mA built in supply for proximity, Infrared sensor.
- Program setting by three soft membrane keys on the front panel.
- Three different industrial sizes are available on request.
- Remote & manual reset facility
Product Specification of Programmable Event Counter with 5 Digit 13 mm Display
- Dimensions:72(W) x 72(H) x 120(D) in mm., 96(W) x 48(H) x 120(D) in mm. , 96(W) x 96(H) x 120(D) in mm.
- Display:5 digit of 13.0mm. height 7 segment red colour bright L.E.D display.
- Output:1NO / C rated 6A at 230VAC.
- Range:0-9999 count, 5 digit / 0-99999, 5 digit is also available on request.
- Cutout:68(W) x 68(H) in mm., 92(W) x 44(H) in mm., 92(W) x 92(H) in mm.
- Time Base:11.059 MHz Quart crystal time base.