Product Profile of Microcontroller Based Timer with Count Up & Down Mode
Systech Automation Systems manufactures Microcontroller Based Timer with Count Up & Down Mode. Systech Automation Systems also manufactures wide ranges of signal isolators, process indicators, process scanner, alarm annunciators, process calibrators, transmitter power supply, pressure instruments etc. Microcontroller Based Timer with Count Up & Down Mode is available with built-in watch-dog circuit for fail safe operation. Timer with Count Up & Down Mode has delay off, on option and program is being set by three soft membrane keys on the front panel.
Key Features of Microcontroller Based Timer with Count Up & Down Mode
- Used latest microcontroller based technology.
- Second, Minute & Hour range programmable by users.
- 0.01, 0.1, 1 count resolution programmable by users.
- Count up & count down mode programmable by users.
- Two Independent setting with relay output.
- 2 Nos. L.E.D. used for RL1 & RL2 ON indication.
- 11.0592 MHz quartz crystal for high accuracy 0.3%.
- Built-in watch-dog circuit for fail safe operation.
- Remote & manual front panel reset & hold facility.
- Program setting by three soft membrane keys on the front panel.
- +12VDC / 50mA built-in supply for proximity, infrared sensor.
- 1NO / C / NC relay contact rated 230VAC / 5AMP. For each set point.
- Power fails three conditions programmable by users.
- Three different DIN sizes are available.
- Optional flameproof model is available on request.
Product Specification of Microcontroller Based Timer with Count Up & Down Mode
- Accuracy:Better then 0.2%
- Dimensions:96(W) x 48(H) x 120(D) mm, 96(W) x 96(H) x 120(D) mm.
- Range:0-9999 (4digit) Second , Minute, Hour range, programmable by users.
- Resolution:0.01, 0.1, 1 (Programmable by users) for all above 3 ranges.
- Supply:230 VAC + 10% 50Hz OR 110V AC + 10% 50Hz. OR 24VDC
- Cutout:92(W) x 44(H) in mm, 92(W) x 92(H) in mm.
