Product Profile of Vertical Sealed and Flanged Type Oil Separator
SAFE A&T Technology Private Limited manufactures Vertical Sealed and Flanged Type Oil Separator. The Vertical Sealed and Flanged Type Oil Separator are designed for installations on commercial refrigeration systems and on civil and industrial Air conditioning plants. The common application includes multi-compressor racks and remote condensing unit. The Vertical Sealed and Flanged Type Oil Separator are designed for installations on commercial refrigeration systems and on civil and industrial Air conditioning plants. Common application includes multi-compressor racks and remote condensing unit.
SAFE A&T Technology Private Limited is certified by UL for ISO ISO9001:2008. SAFE A&T Technology Private Limited also manufactures
Liquid Line Filter Driers, Suction Line Filter Driers, Bi-Flow Filter Driers, Filter Drier / Suction Filter Shell, Desiccant Solid Core and Filters, Receiver Driers, Suction Line
Accumulators, Liquid Refrigeration Receivers, Oil Separators, Heat Exchanger Accumulators, Sight Glass, Ball Valve, Rotolock Valve, etc.
Key Features of Vertical Sealed and Flanged Type Oil Separator
- Prime function of Dry All Oil Separator is to separate oil from the refrigerant and return it to the compressor crankcase before it can enter other components of the system. This increases the life of the compressor.
- Installation of Oil Separator into a system gives a muffling effect on the discharge gas pulsations from the compressors thus reducing the system noise.
- Dry All Oil Separator can be used in ultra low temperature systems with long refrigerant lines with oil return problem.
- Oil Separators should always be installed in the discharge line, between the compressor and the condenser mounted securely in a vertical position as close to the
compressor. It is advisable to insulate the oil separator shell.
- Before preceding with the installation the oil separator must be charged with certain amount of oil through outlet in order to actuate the float mechanism immediately after
start-up. Use the same type of oil as filled in the compressor crankcase.[0.5 Liter initial oil charge for W/F-4 Inches model.]
- Oil Separator Flange Type is equipped with flange and can be opened for cleaning.
- Dry All Oil Separators are compatible with HFCs, HCFs, HCFCs, including R12, 22, 123, 125, 134a, 401A, 401B, 402A, 402B, 404A, 407A/B/C, 408A, 409A, 410A,
410B, 500, 502, 507, 508, 509 etc., and lubricant combination i.e. Mineral oils, Alkyl-benzene [AB], Polyester Oil [POE] and Polyalkylene Premium [PAG].
- Maximum working pressure 653 psig.
