Product Profile of Four- Six Digit Digital Counter
Four- Six Digit Digital Counter is available with infrared sensor which consists of one disk with one hole at peripheral to rotate in sensor gap of 10mm. The Counter is available in 4 digits and 6 digits range. The Counter can work on 230 VAC + 10%, 50Hz. Single phase power. Four- Six Digit Digital Counter is available with up counting method and reset facility by front reset switch.
EMC Automation Pvt. Ltd is the manufacturer of Four- Six Digit Digital Counter. EMC Automation Pvt. Ltd offers different types of electronic process control equipment, digital process control equipment, industrial process control equipment, programmable logic controller, programmable timers, counters, temperature controller, micro programmable controller etc.
Four- Six Digit Digital Counter has the following specifications:
- Range: 4 digits and 6 digits
- Maximum speed of sensing: By method ‘a’ – 10 pulse/ second, by method ‘b’ 100 pulse/ second and by method ‘c’ 1000 pulse/ second
- Memory: non-volatile memory
- Counting type: up counting
- Reset: Standard – by front reset switch
- Power: 230 VAC + 10%, 50Hz, Single phase or +24 VDC/ 500mA
- Size: Overall 96mm X 96mm and Cut out – 90mm X 90mm
Product Specification of Four- Six Digit Digital Counter
- Input pulse:230V AC pulse, D.C. Inductive Proximity Switch, or Infrared Sensor
- Memory:Nonvolatile memory.
- Method:Sensor and Sensing Method : a. NO/NC contact : a. 230V AC Pulse through these contact, b. D.C. Inductive : b One M S Projection of 20mm x 30mm on rotating Proximity Switch. shaft. Sensor to give one pulse per rotation, c. Infrared Sensor : c. One disk with one hole at peripheral to rotate in sensor gap of 10mm.
- Options available:Battery Back-up
- Power:i) 230 VAC + 10%, 50Hz. Single phase. ii) +24 VDC/500mA
- Range:4 digits and 6 digits
- Reset:Standard – By Front Reset Switch,
- Size:i) Overall 96mm x 96mm Cutout – 90mm x 90mm. (ii) Overall 72mm x 72mm Cutout – 69mm x 69mm.
- Supply:230 VAC OR + 24 DC.
