Key Features of High Efficiency Centrifugal Blowers And Fans

• Single piece bearing housing machined in one setting to eliminate alignment problem during assembly and maintenance.
• The body is fabricated and not cast avoiding casting defects like blowholes, porosity, hence, better strength and rigidity.
• Heavy-duty ball/spherical roller bearings are used for long trouble free performance.
• Grease lubricated for life or with re lubrication facility.
• Drain plug is provided for condensate removal.
• Access door is provided for inspection / cleaning.
• Damper is provided at outlet to control airflow rate.
• Manometer tapings are provided at inlet and outlet to facilitate pressure drop measurement.
• Direct driven and belt driven constriction is available.
• Guards are provided at Air inlet and belt that make installation safe.
• Rigid base frame and supports are provided for vibration free performance.
• The material of construction can be AISI 316, AISI 310, Carbon Steel, and custom made.
• Type: Backward inclined / Forward curved / Backward curved / Radial
• Capacity: Custom made up to Max 300 HP
• Material of Construction: Carbon Steel / AISI 304 / AISI 316 / Custom Made
• Total Head: To suit application [Max. 1500 mm WG]
• Direction of discharge: Up blast / Top horizontal / Bottom Horizontal/ Other
• Direction of Impeller: Clockwise / Anticlockwise
• Drive: Direct Driven / V-Belt / Inverter controlled